Hydrostatic / Gas Pressure Testing
Valve & Pressure relief valve gas / liquid testing and setting.
From ½ “- 12” (DN 15 –DN 300mm).
Valve test units for pressure testing any type of Safety Gate-, Globe-, Plug-, Ball-Check-, Slide- and Butterfly valve according to all international test standards.
Testing Unit Capability
|INLET (DN)||INLET (DN)||Maximum test class
(seat test pressure levels)
|1/2 - 2||15-50||500||7250||Class 1500 lbs|
|3||80||383||5555||Class 1500 lbs|
|4||100||230||3335||Class 900 lbs|
|5||125||155||2245||Class 800 lbs|
|6||150||110||1595||Class 300 lbs|
|8||200||65||945||Class 300 lbs|
|10||250||50||725||Class 150 lbs|
|12||300||34||495||Class 150 lbs|
*Pressure levels are based on use of standard supplied o’ring sealing plates
Capabilities of test Bench
Range DN15 – 300 mm. / ¼ – 12″.
Vertical (stem horizontal) clamping system.
Clamping on the inlet flange, both flanges and (proportional clamping).
Between the clamping tables.
1 – 2000 tons of clamping force.
With no or limited linear force on the valve body.
Test pressure range: from vacuum up to 200 bars / 2,900 PSI. Gas test.
Test pressure range: from vacuum up to 600 bars / 9,280 PSI. Liquid test.
Test medium: Liquid, compressed air.
B-Hydraulic and Gas Pressure Test for (On Site)
Hoses all size
Vessles and Pipes
Tanks and Manifolds
All type of valves up to 16 inchs
Well Control Equimpnets
Well testing equipments
C-Third Party Pressure Testing up to 60K PSI (Indoor)
D-Third Party Pressure Testing and Supply up to 45K PSI (Outdoor)
Test bay is a part of 40ft container which capable to carry out hydrostatic test operation up to 45,000 psi remotely and totally separated (from the Operator Room) in safely manner.
Pressure Test Container is certified as Blast proof and Impact proof in the event of incident during carrying out hydrostatic test at 45,000 psi.
Pressure Test Container overall design is satisfy corresponding International.